Estimating

What affects the cost of commercial painting in Toronto and the GTA.

Two commercial painting estimates for the same building can be far apart, and usually it is because they are not pricing the same job. Knowing what drives the price helps you write a clear scope, compare bids fairly and avoid surprises once the work starts.

Surface area, height and complexity

Area is the starting point, but height and complexity change how fast a crew can work. Open office walls go quickly; stairwells, high lobbies, exposed ceilings with ductwork and steel, and rooms full of trim and doors take far longer per square foot.

Preparation is where bids differ most

The finish coat is only as good as the surface under it. Patching, sanding, cleaning, removing failed coatings, caulking and priming can be a large share of the labour on an older building. Ask each contractor to describe their preparation in writing: a low price often means less of it.

  • Drywall repair and skim coating
  • Cleaning and degreasing (kitchens, parking levels, industrial areas)
  • Removing peeling or incompatible coatings
  • Rust treatment on steel before coating
  • Primers matched to the surface

The coating system

Commercial interiors, parking structures, steel, cladding and floors all need different products. Epoxy floor coatings, industrial coatings on steel and specialty finishes cost more than standard wall paint, and they often need more coats or longer cure times. Make sure every estimate names the products and the number of coats.

Access, hours and phasing

Lifts, scaffolding and swing stages add cost on high walls and exteriors. Work that has to happen after hours, on weekends, or in small phases so tenants can keep operating also costs more than painting an empty space in one go, but it is often cheaper overall than closing a floor or a store.

Be clear in the scope about which areas must stay open and when the crew can work. That information changes the price more than almost anything else.

How to compare estimates fairly

Send every contractor the same written scope, then check that each estimate covers:

  • Every area and surface, itemised
  • The preparation included before painting
  • Products, colours, sheens and number of coats
  • Working hours, phasing and the expected schedule
  • Clean-up, protection of floors and fixtures, and touch-ups at the end

Related

02FAQ

Questions.

Why are commercial painting quotes so different from each other?

Usually because they price different preparation, products, access equipment or working hours. An itemised estimate against one written scope is the only fair way to compare.

Is after-hours commercial painting more expensive?

Usually, yes, but it lets the building keep operating. Phased or after-hours work is planned with the owner or manager when the scope is agreed.

Does Altrad provide free commercial painting estimates?

Yes. Altrad gives free, itemised estimates for commercial and industrial painting across Toronto, Mississauga and the GTA.

03Request a quote

Tell us about the property.

Share the address, the surfaces and your timing. Estimates are free, and the office will follow up to arrange the next step.

Call the office
1-866-825-1375Main office line, toll-free
Office hours
Monday to Friday, 9 a.m. – 5 p.m.
Closed weekends

Fields marked Required are needed to prepare a response.

Building type, surfaces, approximate areas, access or occupancy constraints.